Page 1 of 1

Salisbury Plain

PostPosted: Sat Apr 22, 2017 5:41 pm
by chinook
Hi,

Can anyone please tell me the UHF frequencies used on Salisbury plain?

Thanks

Re: Salisbury Plain

PostPosted: Sat Apr 22, 2017 9:54 pm
by gosman767
The only two I have are 122.75 and 276.0 both designated Air to Ground Danger Area Ops no idea if they are valid/current though. HTH

Re: Salisbury Plain

PostPosted: Sat Apr 22, 2017 11:44 pm
by Minus1
The P25 net base transmissions are between 414 and 419.

Some AM freqs I have caught on occasions:
240.75
244.325
245.15

130.25 provides a Danger Area Crossing Service for EGD123 D124 D125 D126 D128

Re: Salisbury Plain

PostPosted: Sun Apr 30, 2017 5:59 pm
by chinook
Hi,

Sorry about my ignorance but what is P25 net base?

I did pick up 414.275.

P

Re: Salisbury Plain

PostPosted: Sun Apr 30, 2017 7:44 pm
by Metradio
Short reply: a digital radio system..
Long reply: https://en.wikipedia.org/wiki/Project_25

Mike

Re: Salisbury Plain

PostPosted: Mon May 01, 2017 7:39 am
by Minus1
Unless you have a P25 capable radio, you'll just hear a digital noise.
Powerful transmitters than can be heard some distance from Salisbury Plain, and because of the otherwise unused frequencies — especially noticeable during dx conditions.

WACN: 90725 (WBWL2A) (Network identifier)
NAC:8B8 (P25 equivalent of a CTCSS/DCS/ColorCode)

Control channels: (Permanent tarnsmit, these have been known to rotate around occasionally)
416.075
416.275 Site 2
417.95
418.775 Site 3