Most should know that updating is really easy. Just download the new setup file and run it. All your previous settings remain unaltered.
I strongly recommend you install this latest version.
If you have not tried eSPYonARD yet, or tried much earlier versions, then please consider installing the free trial. There have been many changes, improvements and additions over the year. The web-site describes them, and there is a YouTube video showing the standard functions. This is the original video, so an early version. Updating that would result in all the User comments being removed, so I do not want that to happen. It does still give a good idea about the program's operation, although there have been many new functions added since it was made.http://www.espyonard.com
Although at the end of the setup it suggests you choose to re-boot, you can ignore that when just updating.
As usual the full details of the update appear as the last entry in the Manual, under the Changes-Log. Here is a summary:
1. Changes to VSQ; LSQ; NSQ; AUTO; TSQ; AND DCS selection in order to attempt a 'fix' because of 1610B firmware issues.
2. Changed default SKIN on first installation. All 12 are still available, including the original. Once you choose a Skin the program remembers your choice.
3. Added extra code to deal with even more formats of downloaded / imported frequency files in 'Q'.
NOTES re. FIRMWARE 1610B
Because firmware 1610B contains the TETRA mode, most people will wish to use it.
There are several anomalies that have been introduced with 1610B. None of them seriously affect the operation of the AR-DV1 (in manual or under software control), but they sometimes produce strange results.
In the main they are triggered whenever the radio calls VFOZ. IF bandwidth, Mode, Step, various Squelch functions especially during a Search, and other things, do not always behave correctly.
These things happen if the radio is controlled entirely manually, i.e. by its buttons, so are not caused by eSPYonARD or by serial communications.
The program has to refer to VFOZ from time to time, and use that VFO for various functions.
After a lot of work, I have created temporary 'fixes' that force the AR-DV1's firmware to behave as it should with almost all the 'bugs'. Usually these occur in the background, and have no visible affects. It may take a second for the program to identify that a firmware bug has kicked in, and to correct it.
The good news is that when using eSPYonARD the 1610B firmware issues are controlled, and most 'fixed' in the background.
END OF YEAR TIP
In a Search or Scan particularly, the program has to constantly send out and process numerous commands in order to keep its screen updated.
The program is intuitive, and if it starts to receive errors from the AR-DV1 it 'slows' down Search and Scan, but only as far as the information is displayed on the program's screen.
Errors may be caused by many factors, including any load on the P.C. at the time, and the number of USB devices connected. From time to time, whilst the program is scanning, right-click the MEM-SCAN button. This resets the 'delay' to its default value.