Maycom AR-108 - User Manual, Guide and Tips

For all your radio modifications, manuals, tips, reviews and guides

Maycom AR-108 - User Manual, Guide and Tips

Postby SilverShadow » Wed Nov 28, 2012 3:25 pm

Image

Maycom AR-108 - User Manual, Guide and Tips

You can download the manual here:
http://www.thiecom.de/ftp/maycom/ar108/ ... manual.pdf

Basically this just a VHF Scanner covering the civil airband and High band VHF from 108 to 180Mhz. You can select AM or FM which basically is AM for the airband and FM for the rest. Its ok for the airband enthusiast to take to the show at civil events (as it doesn't do the military airband) and good for the marine band and taxis but not good for a home or general coverage scanner.

Some features not mentioned in the manual....

How to delete a memory channel:
Push MR and use the UP/DN buttons to select desired memory channel.
Enter the Memeory Set mode FUNC + MR.
Push and hold FUNC + MON down for more than 1 second.
Now the desired memory channel is deleted.

Display test
Push and hold AI and turn the scanner on.
Now you will se all the segments of the AR-108 display.

How to reset the Maycom AR-108 to the factory settings:
Push and hold AI + FUNC and turn the scanner on.
The message INITIAL are shown in the display..
Now the Maycom AR-108 is reset to the factory settings, with 124 MHz stored i memory channel 1 in the Air band, and with 156 MHz stored i memory channel 1 in the "VHF band".

User avatar
SilverShadow
Site Admin
 
Posts: 2110
Joined: Wed Nov 21, 2012 8:54 pm
Location: Midlands UK

Return to Radio & Scanner Mods, Manuals and Tips

Who is online

Users browsing this forum: No registered users and 1 guest