For all your radio modifications, manuals, tips, reviews and guides
I have decided to mount my BCT15 X into my car as the original radio has expired! However as the Uniden would have to sit in the original DIN hole in the dash the speaker would be muffled. Is there a way or adapter leads that would allow me to wire the Uniden into the car speakers?
The speakers are only small and there is only two of them not a multi speaker set up.
- Posts: 46
- Joined: Sun Aug 09, 2015 9:49 am
- Location: Carmarthenshire
There is an external mono 3.5 mm socket on the rear of the RX which according to the manual will be suitable for an 8ohm speaker . If your existing car radio speakers are 4 ohm impedance they can be connected in series to this socket but do not connect the speakers in parallel as this could cause issues with the audio output stages .
Alternatively there are quite a few 8ohm extension speakers available that could be mounted somewhere on the dash which could be connected to the Ext Sp socket
Regards Chris aka G8FFF nipper or tazmin88
- Posts: 352
- Joined: Sun Nov 02, 2014 12:20 pm
- Location: 6.5nM west of 06 threshold marham
Return to Radio & Scanner Mods, Manuals and Tips
Who is online
Users browsing this forum: No registered users and 1 guest