Running out of time - Scanner with automatic Close Call

Talk about radio and non radio stuff in here, a place for Genral Chit Chat

Running out of time - Scanner with automatic Close Call

Postby Giles » Fri Sep 01, 2017 9:28 am

I have no experience with scanners. I wish to identify and log the frequencies used by cyclists, support cars, escort and TV in the OVO Tour of Britain Stage 6 on September 8th.

I acquired a Uniden 75XLT this week. It certainly has a working Close Call facility but, unless as is likely, I have misunderstood the instructions, the acquisition is not automatic. In the sense that you do not hear the signal itself unless you press any button, the Close Call frequencies are not saved and are lost when you switch off, and it only records 10 frequencies.

Ideally, the scan should stop for a few seconds on the signal so you can hear and tell whether it is race commentary, team car, race control or TV. It should then save the frequencies numbered sequentially in permanent memory.

I have not decided whether it is my ignorance which prevents this happening. Or whether this particular scanner does not do this ideal automated logging of Close Call. If not, is there a scanner which does ?

I am running out of time because it takes a while (for me) to get to grips with the varied facilities available on modern scanners. Can anyone advise ? Thank you.
Posts: 1
Joined: Sun Jul 30, 2017 6:28 pm

Re: Running out of time - Scanner with automatic Close Call

Postby m0lsx » Fri Sep 01, 2017 9:46 am

When close call is on. It automatically stops on a active frequency with a VERY strong Signal & to stop it from moving on a few seconds later, you need to press a button.
What you need to remember with CC is that it only works if someone is transmitting very close to you.
CC can also be used to scan & log any hits. So you could have it in your pocket with the volume down & it will grab anything used close by, for you to later go through & check out.
Buy a database from Kimmy JS19 via
Or do Google search of this forum via
73 De Alan (M0LSX.)"
User avatar
Posts: 5225
Joined: Wed Nov 21, 2012 9:14 pm
Location: Norwich. TG21.

Re: Running out of time - Scanner with automatic Close Call

Postby Frequency Hopper » Mon Sep 04, 2017 9:21 pm

As m0lsx said. Most Uniden scanners will stop on CC when you press a key. You can then monitor the frequency to ID the user. Log and store the frequency if required into memory to scan, then press any key to continue and repeat as necessary.
User avatar
Frequency Hopper
Posts: 285
Joined: Sat Jun 15, 2013 10:16 pm

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 2 guests