Page 2 of 2

Re: Whistler TRX-2 - frequency range

PostPosted: Thu Aug 10, 2017 5:50 pm
by G4RMT
Not yet found time to sort, but my TRX-2 does a fine job of my NXDN radios, but at the moment will NOT work on my RT-82 doing DMR on the same channel - when this is fine to and from an MD-380. Not sure why yet - more investigation. Oddly, my analogue repeater in the lists comes up fine, but on auto, NXDN is not decoded on that frequency - lots more testing and trying I think!

Re: Whistler TRX-2 - frequency range

PostPosted: Thu Aug 10, 2017 6:37 pm
by Metradio
Try in Search Mode, all modes should be decoded..
For a saved frequency, the digital mode will only be decoded by indicating in the programming the required mode - Auto does not work for digital modes..

Mike

Re: Whistler TRX-2 - frequency range

PostPosted: Sat Aug 12, 2017 10:30 am
by G4RMT
I've discovered that in the limit search, ticking DMR, or the others makes that the exclusive mode, so to get it to stop on FM or DMR or the others, digital modes need to be unticked. A real shame the other search modes are not much use - it would be nice to be able to search a vhf and uhf band without wasting time on the mil air band!

Re: Whistler TRX-2 - frequency range

PostPosted: Sat Aug 12, 2017 2:41 pm
by Metradio
You can, select limit search, enter Lo frequency, enter Hi frequency, save and away you go..

Mike

Re: Whistler TRX-2 - frequency range

PostPosted: Sun Aug 13, 2017 1:28 pm
by G4RMT
Yep - that's what I'm doing - those shortcuts you posted are handy, thanks.