Forum for CB, PMR, Ham, Business users, GMRS, Repeaters and all other TX Chat
Looking for anyone with experience of these in relation to it being stuck on the Italian frequencies. I have looked inside and can't see anything obvious like dry joints or any damage so now looking to reset back to factory state to see if the CPU is locked somehow. If you know how to do it and don't mind sharing please let me know.
- Posts: 20
- Joined: Wed Nov 18, 2015 1:14 pm
Have you tried the following :-
Product FAQ's - CB Radios, Vehicle / Midland Alan 48 Plus Multi
How do you change the Frequency Band to the UK band?
1 ... With the radio switched off, press and hold both the "AM/FM" and "SCAN" buttons whilst turning on the radio
2 ... After the radio switches on, let go of the held buttons (you have to take your fingers off the buttons as soon as you see all the segments in the display appear) - the current frequency band code will show on the display
3 ... Select the UK code by going up or down through the available codes with the channel knob
4 ... Press the "AM/FM" button to confirm and store the selected band code
If you go abroad, this is the procedure you should use to choose the apprpriate frequency band for where you are travelling.
- Posts: 251
- Joined: Sat Nov 24, 2012 5:39 pm
- Location: N.E. Essex
Don't know if you have sorted this out yet, but I have the same radio and occasionally, when turning it on, I notice it has set itself to Italian despite me having it set to UK.
I have to go through the procedure to get it back on UK.
- Posts: 25
- Joined: Wed Jun 10, 2015 9:38 pm
Return to The TX'ers Forum
Who is online
Users browsing this forum: No registered users and 2 guests