BRIGHTON West Sussex - Shop/Security Frequencies

Regional Radio Scanner Frequencies titled by area, all ENGLAND covered in here

Re: BRIGHTON West Sussex - Shop/Security Frequencies

Postby bigboyblue » Sat Jan 10, 2015 12:03 am

SiKi wrote:There's been some very odd noises over all 4 Brighton&Hove BCRP Channels over the last weeks. Has sounded like DTMF beeps and scrambled voices. But only on certain transmissions :-/ are they moving over to voice inversion scrambling?


Nope. Its some prat on there playing the joker. Also cutting across proper users and holding open the repeater as well.

Some of the shops are affected as well on their simplex channels, so the person is local. One shop has already replaced their radios with mototrbo, and I hear another big retailer will be doing so by the end of the month.

All the voice channels are recorded by the BCRP, so hopefully they are stupid enough to say some stuff.

Already the BCRP is talking about going digital to stop this happening. Sad that one persons actions will spoil the fun listening for all of the rest of us in the future.
bigboyblue
 
Posts: 81
Joined: Fri Apr 25, 2014 5:09 pm

Re: BRIGHTON West Sussex - Shop/Security Frequencies

Postby SiKi » Sat Jan 10, 2015 5:27 pm

Although, saying that, I've not heard anything unusual for the last week..... Hopefully they've stopped for good!!
SiKi
 
Posts: 12
Joined: Mon Dec 22, 2014 10:39 pm
Location: Brighton

Re: BRIGHTON West Sussex - Shop/Security Frequencies

Postby Scanningfan » Fri Sep 16, 2016 10:22 pm

bigboyblue wrote:to add:

Debenhams is on Kenwood nexedge radios, so digital, on the above freq.


Churchill square is digital, on hytera handhelds, so mototrbo compatible.

chan 1/2 453.087500
chan 3/4 453.175000

channels are: 1 - security/management. 2 - housekeeping / cleaners. 3 - emergency use. 4 - car parks


Are these still used or have they changed frequencies do you know ?
Scanningfan
 
Posts: 12
Joined: Sat Sep 10, 2016 12:31 pm

Re: BRIGHTON West Sussex - Shop/Security Frequencies

Postby bigboyblue » Sat Oct 01, 2016 10:12 pm

Yes still in use, but they are digital - you are using a digital capable receiver aren't you ?
bigboyblue
 
Posts: 81
Joined: Fri Apr 25, 2014 5:09 pm

Re: BRIGHTON West Sussex - Shop/Security Frequencies

Postby Scanningfan » Fri Oct 07, 2016 9:35 am

bigboyblue wrote:Yes still in use, but they are digital - you are using a digital capable receiver aren't you ?


Yes I have a Retevis RT3 and have added the freq to a codeplug but even though I get a good signal no reception, so wondering if they are using encryption now ?
Scanningfan
 
Posts: 12
Joined: Sat Sep 10, 2016 12:31 pm

Re: BRIGHTON West Sussex - Shop/Security Frequencies

Postby bigboyblue » Fri Oct 07, 2016 10:56 am

How far away are you, they are using low power on the repeaters, so half way down North street and you loose it.

Weren't using encryption when we were in town last week.
bigboyblue
 
Posts: 81
Joined: Fri Apr 25, 2014 5:09 pm

Re: BRIGHTON West Sussex - Shop/Security Frequencies

Postby Scanningfan » Sat Oct 08, 2016 3:27 pm

Well I can get a signal a few miles away and close to where I live with a 70cm 6 element yagi...can you send me the info you have for it for the codeplug please...don't I need to know the colour code or are you using hacked firmware ?
Scanningfan
 
Posts: 12
Joined: Sat Sep 10, 2016 12:31 pm

Re: BRIGHTON West Sussex - Shop/Security Frequencies

Postby bigboyblue » Sat Oct 08, 2016 9:51 pm

colour code 7 on both repeaters.

With a handheld you loose ch3/4 almost as soon as you are out, they are in a downfire antenna.

1/2 is better, but only down to the seafront and half way down North st.

Are you saying you can get a decent signal from their repeaters, in analogue (I find this to be the easiest way to ensure I am getting a good signal into a radio, then I know its just me with the incorrect digital settings).
bigboyblue
 
Posts: 81
Joined: Fri Apr 25, 2014 5:09 pm

Re: BRIGHTON West Sussex - Shop/Security Frequencies

Postby Scanningfan » Sun Oct 09, 2016 12:23 am

What else needs to be added for the channel info ? Repeater slots 1 or 2 ? I only have added ch3/4 at the moment. With my yaesu vx-2r I was getting a good signal well away from the seafront, it was endstop there and 50% well into London road
Scanningfan
 
Posts: 12
Joined: Sat Sep 10, 2016 12:31 pm

Re: BRIGHTON West Sussex - Shop/Security Frequencies

Postby bigboyblue » Sun Oct 09, 2016 1:12 am

On repeater 1:
ch1 is slot1, ch2 slot2
Repeater 2:
ch3 is slot 1 ch4 is slot 2

I don't know if you need group codes on your radio. I use a Motorola radio, so aren't familiar with yours.

ch1 is the busiest. ch 3 is hardly used.
bigboyblue
 
Posts: 81
Joined: Fri Apr 25, 2014 5:09 pm

PreviousNext

Return to English Frequencies by Area

Who is online

Users browsing this forum: No registered users and 1 guest