UK Radio Scanning Forum

UK Radio Transmitting and Receiving Community

Skip to content


Ballast cleaning train

Find all National Usage Frequencies in here used all over The UK
Post a reply

Ballast cleaning train

Postby DcoltGaming » Sun Aug 21, 2016 1:09 am

Does anyone know the frequency for the Ballast cleaning trains?

Thanks
DcoltGaming
 
Posts: 5
Joined: Tue Aug 02, 2016 7:14 pm
Top

Re: Ballast cleaning train

Postby thelad » Sun Aug 21, 2016 7:08 pm

Must depend on how often it gets dirty? :shocker:
thelad
 
Posts: 897
Joined: Thu Dec 06, 2012 9:30 pm
Top

Re: Ballast cleaning train

Postby Neil57uk » Sun Aug 21, 2016 9:38 pm

Lots of frequencies used by different operators. Who's train and what area?
Neil57uk
 
Posts: 83
Joined: Sat May 02, 2015 9:33 pm
Top

Re: Ballast cleaning train

Postby AndrewIrvine » Sat Sep 10, 2016 10:19 am

If anything at all, the staff will use 449's or 456's. Railway comms with very few exceptions are GSM.
200 miles in 2 days for my 3 children.
https://www.justgiving.com/Andrew-Gordon-50


Pro 2042, Pro 26, 3500XLT, BCT15X
Yaesu FT60-R, Yeasu 1900, Retevis RT3, Tytera MD380, Retevis H777, FDC160A, 278B, Puxing 888

"I'm listening.."
AndrewIrvine
 
Posts: 577
Joined: Thu Aug 01, 2013 10:45 am
Top

Re: Ballast cleaning train

Postby DesertFox » Sat Dec 31, 2016 9:33 pm

Is it possible to listen to GSM?
Uniden IBC125XLT
Tecsun PL-680

Bedfordshire
DesertFox
 
Posts: 7
Joined: Tue Dec 06, 2016 8:58 pm
Location: Bedfordshire
Top

Re: Ballast cleaning train

Postby AndrewIrvine » Tue Jan 10, 2017 1:22 pm

No. It's much the same system as mobile phones.
200 miles in 2 days for my 3 children.
https://www.justgiving.com/Andrew-Gordon-50


Pro 2042, Pro 26, 3500XLT, BCT15X
Yaesu FT60-R, Yeasu 1900, Retevis RT3, Tytera MD380, Retevis H777, FDC160A, 278B, Puxing 888

"I'm listening.."
AndrewIrvine
 
Posts: 577
Joined: Thu Aug 01, 2013 10:45 am
Top

Re: Ballast cleaning train

Postby Neil57uk » Wed Jan 11, 2017 1:10 am

Andrew

I understand that the handfull of GSMR back to back channels have not been activated and were never intended for engineers trains in any event so the loco will use GSMR to talk to control but the crews almost always use UK Gen, SSL or even 446 but not GSMR.
Neil57uk
 
Posts: 83
Joined: Sat May 02, 2015 9:33 pm
Top
Post a reply

Return to Nationwide UK Scanner Frequencies

Who is online

Users browsing this forum: No registered users and 2 guests