Problems Programimg TYT MD380 on PC. Help!

Forum for DMR, dPMR, NEXEDGE, Mototrbo, MARC, Tetra & all other DIGITAL modes

Problems Programimg TYT MD380 on PC. Help!

Postby M6DJK » Wed Jul 29, 2015 6:04 pm

I have recently purchased an TYT MD380, I don't have any local repeaters or anyone using digital in the Tyne and Wear area, so I thought I would be able to listen to other users on DMR, Shopwatch, Pubwatch, Local PMR etc..I have been having problems getting the settings in the TYT MD380 software right. I've got the relevant information from DSD Plus/SDR Sharp using a SDR Dongle. I have the colour colour code TG=1 and the repeater slot 1 or 2 and about 70 frequencies I have heard on DMR in my local area using my SDR Dongle. I would be grateful of any help getting the settings right. Cheers
Posts: 9
Joined: Tue Jul 28, 2015 3:10 pm

Re: Problems Programimg TYT MD380 on PC. Help!

Postby fuzzbutton » Wed Jul 29, 2015 7:03 pm

You need to create a contact (that's where the TG goes), create a channel (that's where the frequency, TS and CC goes) and add the contact to the channel. You'll also want to create a zone and add the channel to it.

If you have more than one talk group in use on a channel then you can create a group list, add all the talk groups to it, and add the group list to the channel.
Posts: 38
Joined: Sun Apr 12, 2015 7:38 pm

Return to DMR & Digital Modes

Who is online

Users browsing this forum: No registered users and 1 guest