whisler 1088 scanner.

Forum for DMR, dPMR, NEXEDGE, Mototrbo, MARC, Tetra & all other DIGITAL modes

whisler 1088 scanner.

Postby everton72 » Sun Oct 02, 2016 9:41 pm

Hi everyone just a bit lost I've hot a whisler scanner 1088 no manual just want to now how you can put frequency s on without a computer. Every yime I put a freq in keep saying analoge I need to put it digital
everton72
 
Posts: 23
Joined: Sun Sep 06, 2015 5:50 pm

Re: whisler 1088 scanner.

Postby g7vak » Sun Oct 23, 2016 5:12 pm

The handbooks are available on the Whistler Site but if the 1088 offering is anything like the TRX2 its next to useless. You can download all you need so you will need access to a PC.

You can easily set it up by placing the SD Card and opening the EZ software and programming it on the screens you see and then popping back into the unit. Doing it manually was, for me, very difficult. These units are not 'switch on and scan' radios and are configured much like other modern radios where you need a 'fill gun,' in this case a PC, to set up your frequencies.

Good luck
g7vak
 
Posts: 5
Joined: Fri Oct 09, 2015 8:25 am

Re: whisler 1088 scanner.

Postby brian-w » Sun Oct 23, 2016 5:36 pm

See also http://new.marksscanners.com/1080_1095/1080_1088.shtml

You may find that easier to understand than the 'official' user manual
brian-w
 
Posts: 38
Joined: Fri Oct 17, 2014 3:01 pm

Re: whisler 1088 scanner.

Postby Buxton » Sat Nov 05, 2016 9:52 pm

if you click on where it says analogue it should show as a drop down box (EzScan software)
User avatar
Buxton
 
Posts: 41
Joined: Sun Oct 09, 2016 8:06 pm
Location: Buxton Derbyshire


Return to DMR & Digital Modes

Who is online

Users browsing this forum: No registered users and 1 guest