TTi TXL-446 programming software

Forum for CB, PMR, Ham, Business users, GMRS, Repeaters and all other TX Chat

TTi TXL-446 programming software

Postby Six of Nine » Wed Jun 10, 2020 6:32 pm

Hello, I recently purchased two TTi TXL-446 transceivers, and the programming cable as well. :walkietalkie:

Trying to download the programming software TXL-446PM_PC Program_V1.0.6
and the service manual TXL-446PM_Service Manual from the site http://www.ttikorea.co.kr
I just get a notification and a login page, both in Korean language... :roll:

I would like to know if there is a way to get the software and the service manual.
Thanks for any explanation.
Six of Nine
 
Posts: 10
Joined: Tue Nov 03, 2015 4:59 pm


Re: TTi TXL-446 programming software

Postby Six of Nine » Fri Jun 12, 2020 4:23 pm

Thank you for your reply, but that is the user manual, which I already have, either on paper and in pdf.

The service manual of any device instead is about its internal circuitry.

However, I would like to know how get the programming software because it allows to unlock twenty further programmable channels not directly accessible otherwise.
Six of Nine
 
Posts: 10
Joined: Tue Nov 03, 2015 4:59 pm

Re: TTi TXL-446 programming software

Postby thelad » Fri Jun 12, 2020 7:10 pm

Do a bit of searching as i am sure its the same as another brand.
thelad
 
Posts: 1328
Joined: Thu Dec 06, 2012 9:30 pm
Location: Uk, Yorkshire.

Re: TTi TXL-446 programming software

Postby thelad » Fri Jun 12, 2020 7:10 pm

Do a bit of searching as i am sure its the same as another brand.
thelad
 
Posts: 1328
Joined: Thu Dec 06, 2012 9:30 pm
Location: Uk, Yorkshire.

Re: TTi TXL-446 programming software

Postby moj » Wed Oct 14, 2020 2:57 pm

I have a copy but i'm not sure if it's for the same model , the one i have says its the TTI TX 446 so not sure if thats different ?
moj
 
Posts: 524
Joined: Wed Nov 21, 2012 9:10 pm
Location: uk , northwest

Re: TTi TXL-446 programming software

Postby Six of Nine » Fri Nov 13, 2020 5:03 am

moj wrote:I have a copy but i'm not sure if it's for the same model , the one i have says its the TTI TX 446 so not sure if thats different ?


Thanks, but in the meanwhile I have found the TXL446PMR Programmer (ver 1.0.2) on a polish site,
https://www.gde.pl/txl-446 (tab "Do pobrania": For download).
I have read of it in a post on an italian Ham forum.

The programming instructions are here:
http://service.alan-electronics.de/Funk ... n-Manuals/
in the file: Programming-Set-Tectalk-Contact2-english.pdf
(the Albrecht Tectalk Contact II is the same as the TTi TXL-446).

And so I have been able to "upgrade" the TXL-446 to 16 analogue PMR446 channels (out-of-the-box it has 8 preprogrammed channels only).

73.
Six of Nine
 
Posts: 10
Joined: Tue Nov 03, 2015 4:59 pm


Return to The TX'ers Forum

Who is online

Users browsing this forum: Google [Bot] and 1 guest