Runcorn / Widnes / Warrington

Regional Radio Scanner Frequencies titled by area, all ENGLAND covered in here

Re: Runcorn / Widnes / Warrington

Postby AndrewIrvine » Mon Jun 06, 2016 9:00 am

I have a friend who can make them up. He isn't on this site, I think he is on that T1 site.


[color=#FF0000]Pro 2042, Pro 26, 3500XLT

Yaesu FT60-R, Yeasu 1900, Retevis RT3, Tytera MD380, Retevis H777, FDC160A, 278B, Puxing 888
, Uniden 3600XLT
"I'm listening.."
AndrewIrvine
 
Posts: 814
Joined: Thu Aug 01, 2013 10:45 am

Re: Runcorn / Widnes / Warrington

Postby AndrewIrvine » Mon Jun 06, 2016 10:51 am

AndrewIrvine wrote:I have a friend who can make them up. He isn't on this site, I think he is on that T1 site.


You can also search for how to make one for specific radios. http://www.discriminator.nl/index-en.html


[color=#FF0000]Pro 2042, Pro 26, 3500XLT

Yaesu FT60-R, Yeasu 1900, Retevis RT3, Tytera MD380, Retevis H777, FDC160A, 278B, Puxing 888
, Uniden 3600XLT
"I'm listening.."
AndrewIrvine
 
Posts: 814
Joined: Thu Aug 01, 2013 10:45 am

Re: Runcorn / Widnes / Warrington

Postby stanogs68 » Mon Jun 06, 2016 1:23 pm

that looks a bit complicated for me mate find your mate that does them for me if you can or sell me one wit instructions ill have a go ,do you think that will help the frequencies am getting them but your saying there slightly off could it be my sdr settings or sdr+ setting can you help me out there andrew and iVE YOU GOT ANY MORE FOR ME ,IM WORKING ON LOADS THAT PHONE AT THE HOSPITAL IS MAD it says all things about ae but it must be analouge ? any help with settings mate cheers stan :radiocall:
stanogs68
 
Posts: 265
Joined: Sat Jan 25, 2014 5:31 pm

Re: Runcorn / Widnes / Warrington

Postby stanogs68 » Mon Jun 06, 2016 3:13 pm

got a new one skips 440.428 slot 1 and 2 cc7 cant find train staions for you got any settings for my sdr + cheers andrew stan :thumbup:
stanogs68
 
Posts: 265
Joined: Sat Jan 25, 2014 5:31 pm

Re: Runcorn / Widnes / Warrington

Postby AndrewIrvine » Mon Jun 06, 2016 6:25 pm

I got a few security ones in Warrington today while supping a pint of Exmoor Gold and a Butter Bitter. I'll post them later. Been on two trains and a bus with heating all set to gas mark 6, one train a 7 minute journey expanded to 30 minutes due to a signal failure.

Warrington might have the Square and shops on the same frequency, different talk groups, I picked up 3 groups in 5 minutes, but the signal was 'back of the box' and a bit garbled. Maybe pubs and SDR listening don't always mix.


[color=#FF0000]Pro 2042, Pro 26, 3500XLT

Yaesu FT60-R, Yeasu 1900, Retevis RT3, Tytera MD380, Retevis H777, FDC160A, 278B, Puxing 888
, Uniden 3600XLT
"I'm listening.."
AndrewIrvine
 
Posts: 814
Joined: Thu Aug 01, 2013 10:45 am

Re: Runcorn / Widnes / Warrington

Postby AndrewIrvine » Mon Jun 06, 2016 7:25 pm

All in the Warrington area this afternoon in an hour. All sounded like retail / shopping centre security.


453.425 (c/s, Alpha to Sierra) Ch3 CC7
453.075, same callsigns, CC7 Cap+ Ch1
455.700 3 talkgroups, all CC6, Ch3, Ch4 and a slot 1
453.4375 CC7, Cap+, Ch6,
453.075 Ch2, CC7


[color=#FF0000]Pro 2042, Pro 26, 3500XLT

Yaesu FT60-R, Yeasu 1900, Retevis RT3, Tytera MD380, Retevis H777, FDC160A, 278B, Puxing 888
, Uniden 3600XLT
"I'm listening.."
AndrewIrvine
 
Posts: 814
Joined: Thu Aug 01, 2013 10:45 am

Re: Runcorn / Widnes / Warrington

Postby AndrewIrvine » Mon Jun 06, 2016 7:39 pm

stanogs68 wrote:got a new one skips 440.428 slot 1 and 2 cc7 cant find train staions for you got any settings for my sdr + cheers andrew stan :thumbup:


Virgin managed stations are generally 453.550 (sometimes on it's duplex split on 460.050) as are a few others, some stations or yards can be 453.900.

Liverpool Lime Street which is Network Rail managed is still analogue on 453.025. I've read 453.1125 and 453.6125, but never heard them in use.


[color=#FF0000]Pro 2042, Pro 26, 3500XLT

Yaesu FT60-R, Yeasu 1900, Retevis RT3, Tytera MD380, Retevis H777, FDC160A, 278B, Puxing 888
, Uniden 3600XLT
"I'm listening.."
AndrewIrvine
 
Posts: 814
Joined: Thu Aug 01, 2013 10:45 am

Re: Runcorn / Widnes / Warrington

Postby stanogs68 » Wed Jun 08, 2016 10:27 pm

All of warrington are on the samé frequencies just lots of groups it just changes to the pubwarch at night theres loads of groups but put them on scan and it picks them all up one of them other hospital numbers you gave me is warrington hospital car parks , ill sort you the number out i cant work out why my sdr+ is not getting the frequencies spot on is it settings ? Thats why i want my old scanner fitted with a discriminator tap to get them better ! Ps sitting in the pub listeningsoundds like a good idea to me h haha
stanogs68
 
Posts: 265
Joined: Sat Jan 25, 2014 5:31 pm

Re: Runcorn / Widnes / Warrington

Postby stanogs68 » Fri Jun 17, 2016 7:23 pm

andrew got loads but wether there bang on is not my fault do you want them mate ?
stanogs68
 
Posts: 265
Joined: Sat Jan 25, 2014 5:31 pm

Re: Runcorn / Widnes / Warrington

Postby AndrewIrvine » Sat Jun 18, 2016 2:30 pm

If you set the bandwidth narrow enough and you know the steps (.000, /.0125, .025. .0375, .050, .0625, .075, .0875) then replace the first digit from 1-9 for every mHz, it's easy... I nailed a few while supping in the Friar Penketh a couple of weeks ago. I got 3 talkgroups etc for Warrington shops / security etc in about an hour, along with other stuff just using a dongle and my laptop. Send me what you have and I'll try cross referencing it with the WTR. I won't be back in the area until September.


[color=#FF0000]Pro 2042, Pro 26, 3500XLT

Yaesu FT60-R, Yeasu 1900, Retevis RT3, Tytera MD380, Retevis H777, FDC160A, 278B, Puxing 888
, Uniden 3600XLT
"I'm listening.."
AndrewIrvine
 
Posts: 814
Joined: Thu Aug 01, 2013 10:45 am

PreviousNext

Return to English Frequencies by Area

Who is online

Users browsing this forum: No registered users and 1 guest