antenna wall plate

A place to talk about everything Radio and Scanning

antenna wall plate

Postby RedboXen » Mon Jan 28, 2019 12:03 am

I'm going to install a Diamond X-50 in my attic and I'm truing to decide the best way to run the cable. I'm going to use some RG-8mini, N Type connector at the Antenna end and then a BNC onto my Whistler TRX2.

I was hoping rather than having the cable hanging out of the wall I'd use a face plate, and then a fly lead to my Scanner. I've not been able to find a wall plate with a SO-239 or other similar connector and thought I'd ask here.

I ran some coax cable from my TV antenna through the walls a few years back, and I left a draw string in there so I could pull extra cables down. Other than replacing the face plate with a dual TV / F Type Socket, I'm not sure that would be a good idea.

Anyone got any experiance with using a F Type Socket/plug like this? or have any other ideas?
Posts: 4
Joined: Tue Sep 25, 2018 10:45 pm

Re: antenna wall plate

Postby radiostationx » Mon Jan 28, 2019 1:24 am

F connector plates are okay if you go for a reputable make like triax or kathrein.
I use webro wf100 coaxial, its 75 ohm. Pretty damn good for the cash.

Supplier suggestion : ... dp/CB14804

One thing, most faceplates have f coupling mounted into them,you will struggle with any coaxial fitted to screw the plate back on as the couplings reach quite far back (about 17 mm with f plug attached to coax). To work within the limits of a standard household 25mm deep socket box and keep the coax nice and straight, you will need right angle f connector adapter like this. ... dp/CN11116

makes life a lot easier.its worth buying good ones.

Decent F plugs for WF100 (aka CT100) ... dp/CN11108

You can get F socket to n type plug and F socket to bnc plug connector adapters.
User avatar
Posts: 103
Joined: Sat Jul 14, 2018 7:29 pm

Re: antenna wall plate

Postby m0lsx » Mon Jan 28, 2019 9:25 am

Personally I would not add connectors inline, unless I really needed to. The attenuation from each connector may be small, but they do add up, with one joint normally adding up to 3 separate connectors & even if you are using good quality connectors that is still 3 insertion losses to take into account.
I very much doubt if a dual TV / F socket face plate will be anything but low insertion loss. Although it should only add 2 connections. However one of those, the one onto the face plate will be hard to make a good one & will probably not be a proper soldered or good quality crimp joint.
Buy a database from Kimmy JS19 via
Or do Google search of this forum via
73 De Alan (M0LSX.)"
User avatar
Posts: 6178
Joined: Wed Nov 21, 2012 9:14 pm
Location: Norwich. TG21.

Return to Radio and Scanning Chat

Who is online

Users browsing this forum: No registered users and 1 guest